Why to Use
When we watch television in a relatively dark room,our eyes are staring directly at a small window of very bright light.If we watching for a long time,then our eyes become fatigued and we experience dry eyes, general discomfort, watery eyes, and even bring headaches. The most worst, some people experience ocular migraines, extreme headaches that result from intense eye strain.
Emotionlite LED RGB Multi-Color Changeable Bias lighting reduce Eye Fatigue
Adds a subtle backlight that is placed directly behind the screen to raise the ambient light levels in the viewing area without directly shining light toward the viewer nor shining light past the viewer toward the screen. Reducing the eyestrain caused by differences in picture brightness from scene to scene in movies, shows and games.
-60″ to 70” TV(HDTV)
-Shelf bias lighting
-Under cabinet light
Anywhere you have a port, you have brilliant and colorful LED lighting.The way you customize your lighting is only limited by your imagination!
4pcs RGB Color LED Light Strips
1pc USB connect cable
1pc Strip Connector
7pcs 4PIN needle
1pc 24 Key Remote Controller
How to Use
Step 1 Clean off the surface on where you intend to stick the light strip to
Step 2 Peel off the 3M adhesive paper and run the strip to all the edge
Step 3 Press and hold the light strip firmly against the surface
Step 4 Connect the DC head of the USB cable with the IR sensor
Step 5 Plug in the LED backlighting strip into the USB port on the device
Step 6 Remove the tab from the battery compartment of the remote control and then Push “ON” and enjoy it.
Pls don’t fold or warp the strip when installing.
Pls follow the arrow when connect the strips together.
Make sure the IR sensor not be blocked during use.
- Color Changeable–Used for light up 4/4 sides for 60″ to 70″ TV (HDTV), 16 colors and 4 dynamic play modes (Flash / Strobe / Fade / Smooth) adjust the LEDs’ color, luminance, or cycle through multiple colors using the 24 key remote control, make your home like theater.
- Reduce Eye Fatigue– Adds a subtle backlight to your 60″ to 70″ size HDTV, reducing the eyestrain caused by changes in picture brightness from scene to scene in games, shows and movies.
- Easy To Use–Simply remove the 3M adhesive cover on the backside of the LED strip and press this to your TV backside. It’s also flexible to fit perfectly for most size monitor. Easy to plug into the USB port on your TV or PC monitor , and turns on off with your screen. Just Plug-and-play.(Remember:clean your TV/Monitor with isopropyl before mount the strip)
- Applications–Mainly used for TV background decoration, make your home like theater. And you really could use this anywhere plug into a usb port on an electrical usb power supply unit and also fit for Cupboard, Attics, Hallway Decoration with 5VDC power adapter.
- Warranty Assurance– 3 years 100% warranty and friendly, easy-to-reach Support. What you get: 2pcs 2.36ft(0.72meter) and 2pcs 4.18ft(1.28 meter) led strips with 3M VHB adhesive tape, 1pc remote controller(battery included), 1pc 60 cm USB cable, 3pcs 12 cm connectors and 7pcs 4pin needle