Why to Use
When we watch television in a relatively dark room,our eyes are staring directly at a small window of very bright light.If we watching for a long time,then our eyes become fatigued and we experience dry eyes, general discomfort, watery eyes, and even bring headaches. The most worst, some people experience ocular migraines, extreme headaches that result from intense eye strain.
Emotionlite LED tape bias lighting reduce eye fatigue
Adds a Subtle backlight that is placed directly behind the screen to raise the ambient light levels in the viewing area without directly shining light toward the viewer nor shining light past the viewer toward the screen.Reducing the eyestrain caused by differences in picture brightness from scene to scene in movies, shows and games.
How to Use
Step 1 Clean off the surface on where you intend to stick the light strip to
Step 2 Peel off the 3M adhesive paper and run the strip to all the edge
Step 3 Press and hold the light strip firmly against the surface
Step 4 Connect the DC head of the USB cable with the IR sensor
Step 5 Plug in the LED backlighting strip into the USB port on the device
Step 6 Remove the tab from the battery compartment of the remote control and then Push “ON” and enjoy it.
-32″-60” TV and monitor backlight
-Shelf bias lighting
-under cabinet light
-Anywhere you have a port, you have brilliant and colorful LED lighting.The way you customize your lighting is only limited by your imagination!
4pcs 16 RGB Color LED Light Strips
1pc USB connect cable
3pcs Led Strip Light Connector
3pcs 4PIN needles
1pc 24 Key Remote Controller
Pls don’t fold or warp the strip when installing.
Pls follow the arrow when connect the strips together.
Make sure the IR sensor not be blocked during use.
- Color Changeable–Can light up 4/4 sides of TV between 32″ to 47″ and 3/4 sides of TV from 50″ to 60″, 16 colors and 4 dynamic play modes, adjust the LEDs’ color, luminance, or cycle through multiple colors using the 24 key remote.
- Reduce Eye Fatigue– Adds a subtle backlight to your monitor, reducing the eyestrain caused by changes in picture brightness from scene to scene in games, shows and movies.
- Easy To Use–Simply remove the 3M adhesive cover on the backside of the LED strip and press this to your TV backside. It’s also flexible to fit perfectly for most size monitor.Easy to plug into the USB port on your TV, and turns on off with your screen. Just Plug-and-play.(Remember:clean your TV with isopropyl before mount the strip)
- Applications–Mainly used for TV background decoration,make your home like theater. And you really could use this anywhere plug into a usb port on an electrical usb power supply unit and also fit for Cupboard, Attics, Hallway Decoration with 5V power adapter.
- Warranty Assurance– 3 years 100% warranty and friendly, easy-to-reach Support. What you get:4pcs 52 cm pre-cut led strips with 3M VHB adhesive tape,1pc remote control(battery included), 1pc 60 cm USB cable, 3pcs 15 cm connectors.